Fab-Tex Filtration | Specializing in Filters for Dust Collection & Pollution Control Equipment

Dust Collector/Filter Bag End Types

Bag type dust collecting systems generally fall into one of the following categories:

  1. Pulse Jet or Plenum Pulse cleaning systems
  2. Shaker or Reverse Flow cleaning systems

ln Pulse Jet and Plenum Pulse systems, the dust is collected on the outside of the filter bag and the clean air exits through the inside of the bag. The bag is supported by a wire cage to prevent the bag from collapsing during operation.

In a 'Top Load' system, the bags and cages are installed from the clean air side of the cell plate while with 'Bottom Load' they are installed from the dirty air/hopper side of the unit.

(Click on thumbnail to enlarge)

Pulse-Type Filter Bags
Pulse-Type Filter Bags

Pulse-Type Filter Bags

  1. Sewn-in Circular Disc Base
  2. Sewn-in Circular Disc Base with Bumper Cuff Reinforcement
  3. Snap Band Top to Fit
  4. Flange Top with Wire Ring
  5. Plain Open Top
  6. Open Top with Cuff and Cord

ln Shaker and Reverse-Air cleaning systems the dust is collected on the inside of the filter bag. Since the bag is inflated with the air/dust stream, support cages are not required. The filtered air exits through the outside surface of the bags. Many configurations are available to suit the needs of most dust collectors.

Shaker-Type Filter Bags
Shaker-Type Filter Bags

Shaker-Type Filter Bags

  1. Strap Top
  2. Loop Top
  3. Open Top with Cuff and Cord
  4. Compression Band Top with Cap
  5. Grommet Top
  6. Sewn-In Wire Hanger Top
  7. Snapband with Grooved Profile to Fit Cell-Plate Hole
  8. Snapband with Flat Felt to Fit Wheelabrator Style Cell-Plate

A knowledgeable and responsive supplier, Fab-Tex offers a range of bags to fit almost every configuration in the marketplace. Talk to us to learn more!

www.fabtexfilters.com